Optimize Bioreactors Quickly with Cloud-based HPC

Combining UberCloud with Fluent and DesignXplorer streamlines the process of characterizing a bioreactor, which is at the heart of every pharmaceutical manufacturing process.

Engineers use response surface methodology (RSM) to understand bioreactor performance. Image courtesy of ANSYS via UberCloud.

By Sravan Kumar Nallamothu and Wolfgang Gentzsch

Bioreactors are at the heart of every pharmaceutical manufacturing process. One goal of a bioreactor is to operate at process conditions that provide sufficient oxygen to the suspended cells. Without this, the cells will not be able to perform efficiently.

The performance of a bioreactor is typically characterized by establishing what is called the “design space,”, which defines the relationships between the various input and output parameters of the cell culture. This knowledge is then used to establish and maintain consistent process and product quality during day-to-day operations.

A design of experiments (DOE) approach is recommended to develop a response surface that characterizes the interdependencies between tank design and process operating conditions.  This can be an expensive and time-consuming exercise to perform in the lab, especially at manufacturing scale.  As such, the pharmaceutical industry has adopted computational fluid dynamics (CFD) modeling as a cost-saving option.

However, the compute resources and simulation time required to explore the relationships between various process parameters can be quite extensive. Therefore, this case study reviews the use of high-performance computing (HPC) to speed up these simulations in a cost-effective manner.

Reduce the Computational Time of Simulation Projects with Cloud Computing

Comparison of solution speed scale-up with different mesh densities. Image courtesy of ANSYS via UberCloud.

Cloud-based HPC offers the computing power of numerous cores to a simulation project. This will reduce the total time required to execute DOE, as each simulation’s computational time is considerably reduced.

UberCloud offers cloud-based HPC as a Software-as-a-Service (SaaS) that is tailored for computer-aided engineering (CAE) software like ANSYS simulation products.

How to Simulate a Bioreactor in ANSYS Fluent

Iso-surface of gas volume fraction colored with bubble diameter. Image courtesy of ANSYS via UberCloud.

Engineers can simulate the water and air present in the bioreactor using the Eulerian multiphase model in ANSYS Fluent.

A population balance model with quadrature method of moments (QMOM) simulates bubble coalescence and break up.

Using this approach, the CFD simulations can predict the overall gas distribution and the distribution of bubble sizes throughout the tank, which are key to determining the bioreactor’s mass transfer rate.

The mixing tank simulations were run using the UberCloud platform in the Microsoft Azure cloud data center in Singapore because the engineer, Sravan Kumar, is working in Pune, India. Fluent showed linear scalability on UberCloud throughout the study of the bioreactor.

Scalability study based on a 688K polyhedral mesh. Image courtesy of ANSYS via UberCloud.

Each simulation — running on 168 cores in the cloud — took less than an hour to solve (vs. a week on a typical workstation). As a result, the whole design space took less than half a day to compute.

The next step employed ANSYS DesignXplorer to generate the response surface.  In this example, the response surface defines the relationship between the mass transfer coefficient, agitation speed, and gas flow rate within the bioreactor.

The results show that combining UberCloud with Fluent and DesignXplorer streamlined the process of characterizing the bioreactor. This setup also reduced simulation time without investing the entire development budget on HPC.

RSM outlining the average mass transfer coefficient versus gas flow rate and agitation speed. Image courtesy of ANSYS via UberCloud.


More UberCloud Coverage

High Performance Computing In The Cloud For Manufacturing Engineers
Download this eBook and discover the numerous advantages offered by HPC in the cloud and how it grants engineers access to the right computing resources necessary for running compute and data-intensive computer simulations.
FLSmidth Engineers Achieve 10X Increase In Their Productivity With UberCloud/Azure As Part Of Their Sustainability And Zero Emission Goals
According a blog post on the UberCloud web site, FLSmidth Engineers Achieve 10X Increase In Their Productivity With UberCloud/Azure.
FEA In the Age of Cloud
Specialized infrastructure providers fill a need in HPC-powered simulation.
Rimac Partners with UberCloud for High-performance Computing in the Cloud
Rimac and UberCloud forged a partnership, with a need for optimized innovation at its core. Rimac and UberCloud implemented several engineering simulations on Microsoft Azure. Designing and configuring the Azure cloud environment specifically for Rimac’s needs. Download this case...
UberCloud High Performance Computing (HPC) in Azure Cloud
HPC enables the high-speed analysis of data and the processing of complex simulations. Partnering with UberCloud, Rimac deployed Computer Aided Engineering (CAE) to design and optimize their mechanical components and assemblies. Download this ebook to learn more.
Squashing Total Cost Rumors of In-House vs. Cloud Computing
More and more manufacturers are moving high-performance computing workloads to the public cloud. Total cost of ownership starts with the analysis and documentation of current in-house computing vs. cloud computing. Download this white paper to learn more.
UberCloud Company Profile

For More Info

To learn more about how UberCloud can speed up ANSYS products, click here. For the complete bioreactor case study, click here.

Sravan Kumar Nallamothu is a senior application engineer at ANSYS. He specializes in modeling mixing in stirred tanks and gas-liquid multiphase flows. Modeling mass transfer in sparged bioreactors and gas-liquid multiphase flow regimes in pipelines and other process equipment are his applications of interest.

Wolfgang Gentzsch is the President and Co-founder of UberCloud, a cloud technology and services provider of fully automated engineering application software containers for any public and private cloud computing resource. 

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.