Mechanical Simulation Adds Electric Powertrains for CarSim and TruckSim 2019.1 

CarSim and TruckSim support options for extending the vehicle models; those options have been used in the automotive industry to interface VehicleSim products with external powertrain models.

CarSim and TruckSim support options for extending the vehicle models; those options have been used in the automotive industry to interface VehicleSim products with external powertrain models.

CarSim and TruckSim now have built-in modules for electric and hybrid powertrains. Image courtesy of Mechanical Simulation.


Mechanical Simulation Corporation has released the 2019.1 versions of the vehicle dynamics simulation tools CarSim and TruckSim, which provide high-fidelity math models that reproduce physical test results, yet run fast enough on the computer to support real-time simulation with hardware in the loop, the company reports.

CarSim and TruckSim support many options for extending the vehicle models, and those options have been used in the automotive industry to interface VehicleSim products with external powertrain models, in addition to the built-in model with an internal combustion engine with traditional transmissions, differentials and clutches. As electric and hybrid powertrains have become more popular, Mechanical Simulation has been adding support for electric and hybrid powertrains as part of the built-in model options.

“Given the use of electric and hybrid powertrains, there is a need for vehicle simulations to represent newer powertrains without requiring additional software,” says Dr. Yukio Watanabe, senior development and consulting engineer, Mechanical Simulation. 

The more recent releases of CarSim and TruckSim have provided increasing support for electric powertrains. Version 2018.1 included a validated Simulink model for a hybrid powertrain that made use of an improved interface between the native vehicle model and external models made in Simulink. In version 2019.0, the same hybrid math model was included as a built-in module for the vehicle model. In the new 2019.1 release, the built-in module was extended to simulate electric-only powertrain.

CarSim and TruckSim users can now choose between three built-in powertrain system modules: conventional internal-combustion engine, pure electric motor or a hybrid of those. Watanabe notes that “the new capabilities enable CarSim/TruckSim users to predict detailed battery usages with re-generative brakes under fuel economy tests such as EPA driving cycles.” The model specifies motor torque characteristics, the number of battery packs, battery open-circuit voltage, etc. with moderate power management controller. 

Sources: Press materials received from the company and additional information gleaned from the company’s website.

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering. Press releases can be sent to them via DE-Editors@digitaleng.news.

Follow DE
#22958